Nortel Networks 5500 series - Manual (Page 492)

492 Adding User Preferences attribute to Active Directory
6 Click OK.
Once you have enabled the User Preferences feature on
the Nortel SNAS (using the CLI command
/cfg/domain
#/aaa/auth #/ldap/enauserpre or the BBI setting User
Preferences under VPN Gateways>Authentication>Auth
Servers (LDAP)>Modify) the remote user should now be able to
store user preferences in Active Directory.
--End--
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.