Nortel Networks 5500 series - Manual (Page 295)

Configuring the cluster 295
cfg/sys/adm/abl
followed by:
clear Clears all blacklisted users/hosts.
ena Enables the auto blacklisting.
dis Disables auto blacklisting.
Configuration of harden password
To configure harden password, use the following command:
cfg/sys/adm/hardenpass
The Harden Password menu appears.
The Harden Password menu includes the following options:
cfg/sys/adm/hardenpass
followed by:
length Specify the minimum length of the password. The value
ranges from 1 to 511.
lowercase Specify the minimum number of lower case characters in the
password. The value ranges from 1 to 511.
uppercase Specify the minimum number of upper case characters in the
password. The value ranges from 1 to 511.
digits Specify the minimum number of digits in the password. The
value ranges from 1 to 511.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.