Nortel Networks 5500 series - Manual (Page 442)

442 CLI reference
Command Parameters/Submenus Purpose
distrace
/cfg/sys/accesslist list
del <index number>
add <IPaddr> <mask>
Manage the Access
List in order to
control Telnet and
SSH access to
the Nortel SNAS
cluster.
/cfg/sys/adm snmp
sonmp on|off
clitimeout <interval>
audit
auth
abl
hardenpass
telnet on|off
ssh on|off
srsadmin
http
https
sshkeys
redist <yes|no>
Configure
administrative
settings for the
system.
/cfg/sys/adm/audit servers
vendorid <vendorid>
vendortype <vendortype>
ena
dis
Configure the Nortel
SNAS to support
RADIUS auditing.
/cfg/sys/adm/audit/servers list <ip> <port>
<secret>
del <index>
add <ip> <port> <secret>
insert <position> <ip>
<port> <secret>
move <index number
value> <new index number
value>
Configure the
Nortel SNAS to use
external RADIUS
audit servers.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.