Nortel Networks 5500 series - Manual (Page 244)

244 Customizing the portal and user logon
/cfg/doamin #/portal/lang
followed by:
setlang <code> Specifies the language to be used for the
portal display.
•
code is the ISO 639 language code to
identify the language
Before you can set the preferred language,
you must import the corresponding
language definition file (see
“Configuring
language support” (page 242) ). To view
supported language codes, use the
/cfg/doamin #/portal/lang/list
command.
charset Prints the character set that is currently in
use on the portal.
list Lists the currently supported languages, by
language code and description.
Configuring the portal display
To modify the look and feel of the portal page that in the client’s web
browser, use the following command:
/cfg/doamin #/portal
The Portal menu appears.
The Portal menu includes the following options:
/cfg/doamin #/portal
followed by:
import <protocol> <server>
<filename>
Imports a graphics file for the banner
(in GIF format) from the specified
TFTP/FTP/SCP/SFTP file exchange
server.
•
protocol is the import protocol.
Options are tftp|ftp|scp|sftp .
•
server is the host name or IP address
of the server
•
filename is the name of the graphics
file (.gif)
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.