Nortel Networks 5500 series - Manual (Page 326)

326 Configuring SNMP
/cfg/sys/adm/snmp
followed by:
versions <v1|v2c|v3> Specifies the SNMP versions allowed.
Enter one or more of the following options:
•
v1 —SNMP version 1
•
v2c —SNMP version 2c
•
v3 —SNMP version 3
To configure support for multiple versions,
use a comma to separate the entries.
The default is all versions (v1, v2c, v3).
snmpv2-mib Accesses the SNMPv2-MIB menu, in
order to configure parameters in the
standard SNMP v2 MIB for the system
(see
“Configuring the SNMP v2 MIB” (page
326) ).
community Accesses the SNMP Community menu, in
order to configure the community aspects
of SNMP monitoring (see
“Configuring the
SNMP community” (page 327) ).
users Accesses the SNMP User menu, in
order to manage SNMPv3 users (see
“Configuring SNMPv3 users” (page 328) ).
target Accesses the Notification Target menu,
in order to configure the notification
target aspects of SNMP monitoring (see
“Configuring SNMP notification targets”
(page 331)
).
event Accesses the Event menu, in order to
create custom monitoring definitions for
the objects in the DISMAN-EVENT-MIB
(see
“Configuring SNMP notification
targets” (page 331) ).
Configuring the SNMP v2 MIB
To configure parameters in the standard SNMPv2 MIB, use the following
command:
/cfg/sys/adm/snmp/snmpv2-mib
The SNMPv2-MIB menu appears.
The SNMPv2-MIB menu includes the following options:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.