Nortel Networks 5500 series - Manual (Page 343)

Viewing system information and performance statistics 343
/info
followed by:
snmp-profi
[<domainid>]
[<profileid>]
information about the configured snmp profile. For
information, see
“Configuring SNMP Profiles” (page
75)
switch [ <domainid> ]
[ <switchid> ]
information about the network access devices in
a domain, by device. Information includes the
switch type, IP address, NSNA communication
port, Red VLAN ID, health check settings, SSH
key, and switch status. The information is a subset
of information displayed by the
/info/domain
command.
contlist [<Exclude
buffers+cache
from mem util:
[yes/no]>]
information about the Nortel SNAS controllers in
the cluster. Information includes the RIP, CPU
usage, memory usage, and operational status of
each device. An asterisk (*) in the MIP column
indicates which Nortel SNAS device in the cluster
is currently is control of the MIP. An asterisk (*) in
the Local column indicates the particular Nortel
SNAS device to which you have connected. To
exclude buffers and cache from the memory usage
reported, enter the command as:
/info/contlist yes . To include buffers and
cache in the memory usage reported, enter the
command as:
/info/contlist no . The default
is to include buffers and cache ( no ).
local the current software version, hardware platform,
up time (since last boot), IP address, and Ethernet
MAC address for the particular Nortel SNAS
device to which you have connected. If you have
connected to the MIP, the information relates to the
Nortel SNAS device in the cluster that is currently
in control of the MIP.
ethernet statistics for the Ethernet network interface card
(NIC) on the particular Nortel SNAS device to
which you have connected. If you have connected
to the MIP, the information relates to the Nortel
SNAS device in the cluster that is currently in
control of the MIP.
•
RX packets: the total number of received
packets
•
TX packets: the total number of transmitted
packets
•
errors: packets lost due to error
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.