Nortel Networks 5500 series - Manual (Page 252)

252 Customizing the portal and user logon
When you first create the linkset, if you do not specify the ID in the
command, you will be prompted to enter the linkset ID or name. You must
enter the ID for the new linkset. You will then be prompted to enter the
linkset name. After you have created the linkset, you can use either the ID
or the name to access the linkset for configuration.
The Linkset menu appears.
The Linkset menu includes the following options:
/cfg/doamin #/linkset <linkset ID>
followed by:
name <name> Names or renames the linkset. After you
have defined a name for the linkset, you
can use either the linkset name or the
linkset ID to access the Linkset menu.
•
name is a string that must be unique in
the domain. The maximum length of
the string is 255 characters.
You reference the linkset name when
mapping the linkset to groups or extended
profiles using the
/cfg/doamin
#/aaa/group #[/extend #]/linkset
command (see “Mapping linksets to a
group or profile” (page 167) ).
When you map the linkset to a group,
members of the group get access to all
the links contained in the linkset. The links
display on the portal Home tab.
text <text> Specifies text to display as a heading
above the linkset links on the portal Home
tab.
•
text is an ordinary text string or HTML
code
The heading text is optional.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.