Nortel Networks 5500 series - Manual (Page 255)

Customizing the portal and logon 255
/cfg/doamin #/linkset <linkset ID> /link <index>
followed by:
type external|ftp Specifies the type of link. The options are:
•
external —directs the client to a web
page. The external link is not secured
by the Nortel SNAS.
•
ftp —directs the client to a directory on
an FTP file exchange server
The default is external .
The Link menu changes to include a
command corresponding to the specified
link type.
ATTENTION
Nortel Secure Network Access Switch
Software Release 1.6.1supports
external links only.
external Accesses the External Settings menu, in
order to configure settings for the link (see
“Configuring external link settings” (page
255)
).
This command only if the link type is
external .
ftp Accesses the FTP Settings menu, in order
to configure settings for the link.
This command only if the link type is ftp .
del Removes the link from the current
configuration.
Configuring external link settings
To launch the wizard to configure settings for a link to an external web
page, use the following command:
/cfg/doamin #/linkset <linkset ID> /link <index> /
external/quick
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.