Nortel Networks 5500 series - Manual (Page 254)

254 Customizing the portal and user logon
•
link text—a string that on the portal Home tab as the clickable link text.
You can later modify the text by using the
text command on the Link
menu.
•
type—the link type ( external or ftp ). The default is external .
After you enter the link type, you automatically enter a wizard to
configure type-specific settings for the link. You can later relaunch the
wizard to modify the settings. For more information about the settings,
see
“Configuring external link settings” (page 255) .
The Link menu appears.
The Link menu includes the following options:
/cfg/doamin #/linkset <linkset ID> /link <index>
followed by:
move <new index> Moves the link to a new position in the
linkset. The index numbers of existing link
entries with this index number and higher
are incremented by 1.
•
new index is an integer in the range 1
to 256 that indicates the position of the
link in the linkset
For example: You have two portal links,
Link 1 and Link 2. To move Link 2 so it
before Link 1 on the portal page, enter the
following command:
>> Link 3# move 1
Link 2 becomes Link 1, and Link 1
becomes Link 2.
text <text> Specifies text to display as the clickable
link text on the portal Home tab.
•
text is an ordinary text string or HTML
code
Provide descriptive text that clearly
identifies the targeted resource. The
client sees only the link text, not the URL
contained in the link.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.