Nortel Networks 5500 series - Manual (Page 292)

292 Configuring system settings
/cfg/sys/adm/auth
followed by:
ena Enables RADIUS authentication of system
users.
The default is disabled.
dis Disables RADIUS authentication of system
users.
The default is disabled.
Managing RADIUS authentication servers
To configure the Nortel SNAS to use external RADIUS servers to
authenticate system users, use the following command:
/cfg/sys/adm/auth/servers
The RADIUS Authentication Servers menu appears.
The RADIUS Authentication Servers menu includes the following
options:
/cfg/sys/adm/auth/servers
followed by:
list Lists the IP addresses of currently configured
RADIUS authentication servers, by index
number.
del <index number> Removes the specified RADIUS authentication
server from the current configuration. The
index numbers of the remaining entries adjust
accordingly.
To view the index numbers of all configured
RADIUS authentication servers, use the
list
command.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.