Nortel Networks 5500 series - Manual (Page 116)

116 Configuring the domain
Table 16
Configuring local DHCP services
/cfg/doamin #/dhcp
followed by:
subnet <number>
<type> <name>
<address>
<netmask>
Initiates a series of prompts that define the DHCP subnet.
•
number is a unique number between 1 and 256 that you provide that the
system uses to identify the subnet. The prompt is— Enter DHCP subnet
number (1-256):
•
type is a Nortel SNAS term that defines the type of DHCP service. The
prompt is— Select one of hub, filter and standard:
See above the table for the application of each type.
— hub : for support of network access devices that do not support
SSCP, and multiple devices on a single port.
— filter : to provide a mechanism for redirecting the client to the
corporate DNS server when the network access points are NSNA
network access points and Filters only enforcement is configured.
— standard : for standard DHCP services that conform to RFC 2131
for DHCP relayed messages.
Each type has a set of configuration options associated with it. For
information on these options, see
“Standard DHCP subnet type” (page
121) , “Filter DHCP subnet type” (page 120) , or “Hub DHCP subnet type”
(page 118) .
•
name refers to a name you provide for the subnet. The prompt is— Set
the subnet name:
•
address is the subnet address. The prompt is— Enter subnet
network address:
•
netmask is the subnet mask. The prompt is— Enter subnet network
mask:
stdopts Prompts you to identify and configure values for the standard DHCP options.
As a minimum, you must configure Option 3 (Default Router), Option 6
(Domain Name Server), Option 15 (Domain Name), and Option 51 (Lease
Time). When configuring Option 51 (Lease Time), the lease interval is
specified in seconds.
The values set at this level of the DHCP menus are applied globally to all
DHCP subnets and types. You are provided with the option of changing
the global values when specific DHCP settings are configured. See
“DHCP
Settings menu” (page 117) .
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.