Nortel Networks 5500 series - Manual (Page 37)

Nortel SNAS configuration roadmap 37
The configuration chapters in this User Guide describe the specific CLI
commands used to configure the Nortel SNAS. For general information
about using the CLI, see
“The Command Line Interface” (page 377) .
• Security & Routing Element Manager (SREM)
The SREM is a GUI application you can use to configure and manage
the Nortel SNAS.
For information about configuring the Nortel SNAS using the SREM,
see Nortel Secure Network Access Switch 4050 User Guide for the
SREM (NN47230-101), . For general information about installing and
using the SREM, see Installing and Using the Security, .
• Browser Based Interface (BBI)
The BBI is a web browser application you can use to configure and
manage the Nortel SNAS.
For information about configuring the Nortel SNAS using the BBI, see
Nortel Secure Network Access Switch Configuration — Using the BBI
(NN47230-500).
•
Enterprise Policy Manager (EPM) release 4.2
Enterprise Policy Manager (EPM) is a security policy and quality
of service provisioning application. You can use EPM to provision
filters on the Nortel SNAS network access devices. EPM 4.2 supports
preconfiguration of Red, Yellow, and Green VLAN filters prior to
enabling the Nortel SNAS feature. In future releases of the Nortel
SNAS and EPM software, users will have the additional ability to add
and modify security and quality of service filters while Nortel SNAS is
enabled on the device.
For general information about installing and using EPM, see Installing
Nortel Enterprise Policy Manager (318389), .
• Simple Network Management Protocol (SNMP) agent
For information about configuring SNMP for the Nortel SNAS, see
“Configuring SNMP” (page 323) .
Nortel SNAS configuration roadmap
The following task list is an overview of the steps required to configure the
Nortel SNAS.
Step Action
1 Configure the network DNS server to create a forward lookup
zone for the Nortel SNAS domain.
For an example, see “Configuration example” (page 385) .
2 Configure the network DHCP server.
For an example, see “Configuration example” (page 385) .
For each VLAN:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.