Nortel Networks 5500 series - Manual (Page 112)

112 Configuring the domain
Table 13
Configuring RADIUS accounting (cont’d.)
/cfg/domain #/aaa/radacct
followed by:
ena Enables RADIUS accounting.
The default is disabled.
dis Disables RADIUS accounting.
The default is disabled.
Managing RADIUS accounting servers
To configure the Nortel SNAS to use external RADIUS accounting servers,
use the following command:
/cfg/domain #/aaa/radacct/servers
The Radius Accounting Servers menu appears.
The Radius Accounting Servers menu includes the following options:
Table 14
Managing RADIUS accounting servers
/cfg/domain #/aaa/radacct/servers
followed by:
list Lists the IP addresses of currently configured
RADIUS accounting servers, by index number.
del <index number> Removes the specified RADIUS accounting
server from the current configuration. The
index numbers of the remaining entries adjust
accordingly.
To view the index numbers of all configured
RADIUS accounting servers, use the
list
command.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.