Step 7, Step 8 – Nortel Networks 5500 series User Manual
Page 86
86
Configuring the domain
Use existing certificate (no/1) [no]:
Create a test certificate?
(yes/no): no
Enter server certificate.
Paste the certificate and key, press Enter to create a
new line, and then type "..." (without the quotation
marks) to terminate.
>
7
To create a test certificate:
a
At the prompt to create a test certificate, enter
Yes
.
b When prompted, enter the required certificate information.
For more information, see
“Generating and submitting a CSR”
c
To continue, go to
Use existing certificate (no/1) [no]:
Create a test certificate?
(yes/no): yes
The combined length of the following parameters may not
exceed 225 bytes.
Country Name (2 letter code):
State or Province Name (full name):
Locality Name (eg, city):
Organization Name (eg, company):
Organizational Unit Name (eg, section):
Common Name (eg, your name or your server’s hostname):
Email Address:
Subject alternative name (blank or comma separated
list of URI:<uri>, DNS:<fqdn>, IP:<ip-address>,
email:<email-address>):
Valid for days [365]:
Key size (512/1024/2048/4096) [1024]:
8
Specify whether the SSL server uses chain certificates.
Do you require chain certificates (yes/no) [no]:
9
If you want to enable HTTP to HTTPS redirection, create a
redirect server.
Do you want an http to https redirect server (yes/no)
[no]:
10
Specify whether you want to add a network access devices to
the domain.
Do you want to configure a switch?
(yes/no) [no]:
If you do want to add a network access devices, enter
yes
to
launch the quick switch wizard. Go to
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.