System diagnostics, Installed certificates, Network diagnostics – Nortel Networks 5500 series User Manual

Page 410

Advertising
background image

410

Troubleshooting

Table 63
Sample output for the trace command (cont’d.)

Tag

Description

Sample output

ssl

Logs information
related to the
SSL handshake
procedure (for
example, the cipher
used)

>> Maintenance#

13:15:55.985432:

Trace started

13:16:26.808831 10.1.82.145 (1) ssl:

"SSL accept

done, cipher is RC4-MD5"

13:16:28.802199 10.1.82.145 (1) ssl:

"SSL accept

done, cipher is RC4-MD5"

13:16:29.012856 10.1.82.145 (1) ssl:

"SSL accept

done, cipher is RC4-MD5"

nha

Logs information
related to a Nortel
Health Agent check
(for example, SRS
rule check result)

>> Maintenance#

13:27:50.715545:

Trace started

13:27:54.976137 10.1.82.145 (1) nha:

"ssl user

john[192.168.128.19] - starting Nortel Health Agent

ssl session"

13:28:17.204049 10.1.82.145 (1) nha:

"ssl user

john[192.168.128.19] - agent authentication ok"

13:28:18.807447 10.1.82.145 (1) nha:

"user

john[192.168.128.19] - SRS checks ok, open session"

To disable tracing, press Enter to display the Maintenance menu prompt,
then enter

stoptrace

.

System diagnostics

The following are useful diagnostic display commands. For more
information about the commands, use the alphabetical listings in

“CLI

reference” (page 413)

to cross-reference to where the commands are

described in more detail in this guide.

Installed certificates

To view the currently installed certificates, enter the following command:

>> Main# /info/certs

To view detailed information about a specific certificate, access the
Certificate menu and specify the desired certificate by its index number:

>> Main# /cfg/cert

Enter certificate number:

(1-) <certificate number by index>

>> Certificate 1# show

Network diagnostics

To check if the Nortel SNAS is able to contact configured network access
devices, routers, DNS servers, authentication servers, and IP addresses or
domain names specified in group links, use the following command:

>> Main# /maint/chkcfg

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Copyright © 2007, 2008 Nortel Networks

.

Advertising
This manual is related to the following products: