Nortel Networks 5500 series - Manual (Page 312)

312 Managing certificates
Figure 16
Adding a certificate by pasting
--End--
Adding a private key to the Nortel SNAS
Step Action
1 Access the Certificate menu by using the /cfg/cert <cert
id> command, where <cert id> is the certificate number.
Use the same certificate number you used when pasting the
certificate.
2 Copy the contents of the private key file.
a Locate the file containing the private key. Make sure the
key file corresponds with the certificate file you received
from the CA. The public key contained in the certificate
works in concert with the related private key to handle SSL
transactions.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.