Nortel Networks 5500 series - Manual (Page 257)

257
.
Configuring system settings
This chapter includes the following topics:
Topic
“Configuring the cluster” (page 257)
“Roadmap of system commands” (page 258)
“Configuring system settings” (page 262)
“Configuring the Nortel SNAS host” (page 264)
“Configuring host interfaces” (page 268)
“Configuring static routes” (page 270)
“Configuring host ports” (page 271)
“Managing interface ports” (page 272)
“Configuring the Access List” (page 273)
“Configuring date and time settings” (page 274)
“Configuring DNS servers and settings” (page 276)
“Configuring RSA servers” (page 279)
“Configuring syslog servers” (page 279)
“Configuring administrative settings” (page 281)
“Enabling TunnelGuard SRS administration” (page 284)
“Configuring Nortel SNAS host SSH keys” (page 284)
“Configuring RADIUS auditing” (page 286)
“Configuring authentication of system users” (page 290)
System settings apply to a cluster as a whole.
You can log on to either the Management IP address (MIP) or a Nortel
SNAS host Real IP address (RIP) in order to configure the system.
Configuring the cluster
To configure the cluster, access the System menu by using the following
command:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.