Nortel Networks 5500 series - Manual (Page 136)

136 Configuration of the RADIUS server
/cfg/domain/radius/methods
followed by:
insert <index number>
<method name>
Inserts a methods at a particular position
in the list
•
index number —is the identification
number automatically assigned to the
method,when you added the method
to the configuration.specify the index
number.
•
method name —is a string that must
be unique. The maximum allowable
length of the string is 255 characters,
but Nortel recommends a maximum
of 32 characters.
move <index number>
<destination index>
Moves a method up or down the list .
•
index number —the original index
number of the method you want to
move.
•
destination index —the index
number representing the new position
of the method in the list.
Configuration of the EAP authentication methods
To configure the EAP authentication methods, use the following command:
/cfg/domain/radius/eapmethods
The EAP Authentication Methods menu appears.
The EAP Authentication Methods menu includes the following options:
/cfg/domain/radius/eapmethods
followed by:
list Lists the EAP authentication methods.
•
1: 4 : eap_md5
•
2 :6 : eap_gtc
•
3: 26 : eap_mschapv2
•
4: 13 : eap_tls
•
5: 21 : eap_tls
•
6 :25 :eap_tls
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.