KYORITSU 6310 Instruction Manual - Manual (Page 111)

KEW6310 4.2.3 Save Setting
KEW6310
4.70
Data Transfer
* Data saved in the internal memory remains after data transfer.
1 Press the Cursor Keys and select [Data transfer (MEM → CF)], and then press the
ENTER Key
if a CF Card isn’t inserted;
no dialogue appears and a message “No CF Card” is displayed.
if a CF Card hasn’t been formatted;
no dialogue appears and a message “Unformatted CF Card” is displayed.
if no procesable file exists;
dialogue doesn’t appear and a message “No processable file” is displayed.
2
Press the Cursor Keys and select the file to be transferred, and then press the ENTER Key.
Press the F1 Key to select all files. Press the F1 Key again to cancel the selection.
Check the box. Press the Cursor
Keys to see file size and
updated date& time.