KYORITSU 6310 Instruction Manual - Manual (Page 73)

KEW6310 4.2.2 Measurement Setting (Harmonic Analysis)
KEW6310
4.32
< Adopting default values >
1 Press the Cursor Keys and select [Allowable range], and then press the ENTER Key.
2
Press the Cursor Keys and select [Default Value], and then press the ENTER Key.
3
Selectable default value is displayed. Press the Cursor Keys and point [OK] to accept
the value and press the ENTER Key. Point [Cancel] with Cursor Keys, and press the
ENTER Key to select the values other than the ones listed below. (or press the ESC Key) Then
screen returns to 1. Select [Customize] and set a desirable value. See “Adopting customized
values” which indicates how to customize the values.
Drop down list appears.
Point the cursor here.
Setting for allowable range
is displayed.