Setting for inst / avg / max / min values – KYORITSU 6310 Instruction Manual User Manual
Page 63
KEW6310 4.2.2 Measurement setting (W/Wh/DEMAND)
KEW6310
4.22
Setting for inst / avg / max / min values
Select “ON” for the parameters to be saved.
ON⇔OFF
* Default value (or after system reset) : ON
1
Press the
Cursor
Keys and select any of [Inst / Avg / Max / Min], and then press the
ENTER
Key.
2
Press the
Cursor
Keys and select “ON” or “OFF”, and then press the
ENTER
Key.
When an interval is set to 1 sec, Inst value= Avg value= Max value = Min value. In this case, only Inst
values are recorded. (“ON” is available only for Inst) Incapable of applying “OFF” to all the items.
3
Press the
Cursor
Keys and make settings for [Avg / Max / Min] as well.
Drop down list appears.
ON / OFF is displayed.
Point a parameter to change the setting.