KYORITSU 6310 Instruction Manual User Manual
Page 152
6.3.1 Instantaneous value measurement -Saving procedure KEW6310
6.13
KEW6310
3
Manually start saving data, or press the
F4
Key. Stand-by screen (WAIT) appears if saving
start date and time has been specified.
4
Saving starts and the LED status indicator lights up.
No setting change can be made during data saving . Press the
F4
Key to check the settings.
5
Press
the
F1
Key to stop measurement. (At measurements with Timer function activated, this
Key activates in the same way.)
6
Measurement will end and the LED status indicator goes off.
File name for saving data is displayed.
Flashes
Destination for saving data will be highlighted
and flashes in red.
File name for saving data is displayed.
goes off
Flashes.
Flashes.