KYORITSU 6310 Instruction Manual - Manual (Page 235)

KEW6310 11.5.3 Power quality – Saving procedure (Unbalance rate)
KEW6310
11.30
3 Manually start saving data, or stand-by screen (WAIT) appears if saving start date and time
has been specified.
4
Saving starts and the LED status indicator lights up.
.
Settings cannot be done during a data saving. Press the F4 Key to check the settings.
5 Press the F1 Key to stop measurement.
(At measurements with Timer function activated, this Key activates in the same way.)
6 Measurement will end and the LED status indicator goes off.
. Flashes
File name for saving data is displayed.
Destination to save data will be
highlighted and flashes in red.
File name for saving data is displayed.
. Flashes.