KYORITSU 6310 Instruction Manual - Manual (Page 191)

KEW6310 9.3.1 WAVE Range – Saving Procedure
KEW6310
9.8
3 Manually start saving data, or stand-by screen (WAIT) appears if saving start date and time
has been specified.
4 Saving starts and the LED status indicator lights up.
No setting change can be made during data saving . Press the F4 Key to check the settings.
5 Press the F1 Key to stop measurement. (At measurements with Timer function activated, this
Key activates in the same way.)
6 Measurement will end and the LED status indicator goes off.
File name for saving data is displayed.
Flashes.
Flashes.
Destination to save data will be
highlighted and flashes in red.
File name for saving data is displayed.