KYORITSU 6310 Instruction Manual - Manual (Page 57)

KEW6310 4.2.1 Basic Setting
KEW6310
4.16
Setting for CT ratio
0.01 ~ 9999.99 (can be set by 0.01)
* Default value (or after system reset) : 1.00
For the details of CT ratio, refer to “5.4 VT / CT Ratio” in this manual.
1 Press the Cursor Keys and select [CT Ratio], and then press the ENTER Key.
2 Setting procedure is same to that for VT ratio. Refer to the procedure described in the
preceding pages.
3
Press the Cursor Keys and select CT ratio for the other Chs, and make settings in the
same way.