KYORITSU 6310 Instruction Manual - Manual (Page 89)

KEW6310 4.2.2 Measurement Setting (QUALITY-Transient Measurement)
KEW6310
4.48
Setting for interval
* Default value (or after system reset) : 30 min
* Setting procedure is same to that for interval Setting for W/ Wh/ DEMAND.Refer to the procedure described in
the preceding pages.
Setting for voltage range
150/ 300/ 600/ 1000V
* Default value (or after system reset) : 1000V
1 Press the Cursor Keys and select [V Range], and then press the ENTER Key.
2 Press the Cursor Keys and select a Voltage Range and then press the ENTER Key.
Drop down list appears.
Selected Voltage Range
is displayed.