KYORITSU 6310 Instruction Manual - Manual (Page 213)

KEW6310 11.2.3 Power quality – Saving procedure (Swell/ Dip/ Int measurement)
KEW6310
11.8
3 Manually start saving data, or stand-by screen (WAIT) appears if saving start date and time
has been specified.
4 Saving starts and the LED status indicator lights up.
No setting change can be made during data saving. Press the F4 Key to check the settings.
5 Press the F1 Key to stop measurement. (At measurements with Timer function activated, this
Key activates in the same way.)
6
Measurement will end and the LED status indicator goes off.
File name for saving data is displayed.
. Flashes.
Flashes.
Destination to save data will be
highlighted and flashes in red.
File name for saving data is displayed.