KYORITSU 6310 Instruction Manual User Manual
Page 244
11.6.3 Power quality – Data saving(Flicker) KEW6310
11.39
KEW6310
3
Manually start saving data, or stand-by screen (WAIT) appears if saving start date and time
has
been
specified.
4
Saving starts and the LED status indicator lights up.
Setting cannot be done during a data saving. Press the
F4
Key to check settings.
LCD will be automatically blank in 1min when Flicker measurements start.
Key operation confirmation sound is disabled during measurements.
5
Press
the
F1
Key to stop measurement.
(At measurements with Timer function activated, this Key activates in the same way.)
6
Measurement will end and the LED status indicator goes off
Flashes.
File name for saving data is displayed.
Flashes.
Destination to save
data will be
highlighted and
flashes in red.
File name for saving data is displayed.
Ten min
later
Screen for Preliminary
measurement is displayed.