KYORITSU 6310 Instruction Manual - Manual (Page 47)

KEW6310 4.2.1 Basic Setting
KEW6310
4.6
Setting for VT Ratio
0.01 ~ 9999.99 (can be set by 0.01)
* Default value (or after system reset) : 1.00
For the details of VT ratio, refer to “5.4 VT / CT Ratio” in this manual.
1 Press the Cursor Keys and select [VT Ratio], and then press the ENTER Key.
2
Press the Cursor Keys and alter the values, and press the ENTER Key
to fix it.
Box with ▲▼ mark appears
at the hundredths' place.
Press the Cursor to toggle the
value from 0 to 9.
When increasing a value to 0 in ascending sequence,
value at the tents' place increases by 1.
Press the
Cursor to toggle the
value from 9 to 0.