KYORITSU 6310 Instruction Manual - Manual (Page 76)

KEW6310 4.2.2 Measurement Setting (Harmonic Analysis)
4.35
KEW6310
Setting for MAX HOLD
For the details of Max Hold in Harmonic Analysis, refer to “Section10 Harmonic analysis” in this manual.
ON⇔OFF
* Default value (or after system reset) : ON
1 Press the Cursor Keys and select [MAX Hold], and then press the ENTER Key.
2
Press the Cursor Keys and select “ON” or “OFF”, and then press the ENTER Key.
Drop down list appears.
ON or OFF is displayed.