KYORITSU 6310 Instruction Manual User Manual
Page 203
KEW6310 10.3.1 Harmonic Analysis – Saving procedure
KEW6310
10.8
3
Manually start saving data, or stand-by screen (WAIT) appears if saving start date and time
has
been
specified.
4
Saving starts and the LED status indicator lights up.
No setting change can be made during data saving . Press the
F4
Key to check the settings. The channels
with “OFF” setting aren’t displayed.
5
Press the
F1
Key to stop measurement. . (At measurements with Timer function activated, this
Key activates in the same way.)
6
Measurement will end and the LED status indicator goes off.
Flashes.
File name for saving data is displayed.
.
Flashes.
Destination to save data will be highlighted
and flashes in red.
File name for saving data is displayed.