KYORITSU 6310 Instruction Manual - Manual (Page 82)

KEW6310 4.2.2 Measurement Setting (QUALITY-Swell, Dip, INT Measurement)
4.41
KEW6310
Setting for dip
5~ 100% (can be set by 1%)
* Default value (or after system reset) : 90%
1 Press the Cursor Keys and select [Dip], and then press the ENTER Key.
2 Press the Cursor Keys and alter values, and then press the ENTER Key.
Lower limit varies depending on the selected reference voltage.
● 70 ~ 150V : percentage to obtain values of 7.5 or more
● 151 ~ 300V : percentage to obtain values of 15.0 or more
● 301 ~ 600V : percentage to obtain values of 30.0 or more
● 601 ~ 1000V : percentage to obtain values of 50.0 or more
Box with ▲▼ mark appears
at the rightmost digit.
Selected dip is displayed.