KYORITSU 6310 Instruction Manual - Manual (Page 54)

4.2.1 Basic Setting KEW6310
4.13
KEW6310
Setting for Current Range
Available Current Range varies depending on the Clamp sensor to be used.
8128 1/5/10/20/50A/AUTO
8127 10/20/50/100A/AUTO
8126 20/50/100/200A/AUTO
8125 50/100/200/500A/AUTO
8124 100/200/500/1000A/AUTO
8129 300/1000/3000A
8141
8142
8143
100mA/500mA/1A/AUTO
8146
8147
8148
500mA/1/5/10A/AUTO
* Default value (or after system reset) : 200A(8125)
1 Press the Cursor Keys and select [A Range], and then press the ENTER Key.