KYORITSU 6310 Instruction Manual - Manual (Page 50)

4.2.1 Basic Setting KEW6310
4.9
KEW6310
Manual setting and auto setting both are available for Clamp sensors.
<< Manual Setting >>
1 Press the Cursor Keys and select [Clamp], and then press the ENTER Key.
2
Press the Cursor Keys and select a Clamp sensor to be used, and then press the
ENTER Key.
Drop down list appears.
Selectable Clamp sensors
depend on the selected wiring
configurations.
Selected Clamp sensor is displayed with
corresponding Ch.