KYORITSU 6310 Instruction Manual - Manual (Page 168)

7.3.2 Integration measurement – Limitations of saving KEW6310
7.7
KEW6310
7.3.2 Limitations of saving
Refer to “6.3.2 Limitations of saving” in this manual.
7.3.3 Saved data
Settings
FILE ID : File name
VERSION : Version info
ID NUMBER : ID number
WIRING : Wiring configuration
VOLT RANGE : Voltage Range
VT RATIO : VT ratio
SENSOR TYPE : Model name of Clamp sensor
CURRENT RANGE : Current Range
CT RATIO : CT ratio
CURRENT FILTER : Current Filter
DC RANGE : DC Range
FREQUENCY : Frequency
INTERVAL : Interval
START : Saving start time
Save data
File ID : 6310-02
Saved time & date Elapsed time
Active power
energy
( consumption /
regenerating )
Apparent power
energy
( consumption /
regenerating )
Reactive power
energy
( consumption /
regenerating )
DATE TIME ELAPSED TIME INTEG_WP INTEG_WS INTEG_WQ
yyyy/mm/dd h:mm:ss h:mm:ss (±)x.xxxxxE±nn
year/month/ date hour:min:sec hour:min:sec (±) value x 10 ±n
* Reactive power (consumption :+ / regenerating :- ) will be recorded with phase information: lagging (i) or leading (c).
* At Wh Range, data measured at W Range and above measurement data are recorded at the same time.
1.23456E+7 = 1.23456 x 10
7
= 12345600
* e.g. of measured data