4 usb driver un-installation – KYORITSU 6310 Instruction Manual User Manual
Page 274
13.4 USB driver un-installation KEW6310
13.7
KEW6310
13.4 USB driver un-installation
When install of the USB driver is interrupted and reinstall cannot be done, follow the procedure
below and delete the existing USB driver. Then install it again.
(1)
Connect a PC and the instrument with a USB cord.
(2)
Click [Control Panel] in the Start menu at the lower left on the Windows screen.
(3)
Click [System] in the control panel.
(4)
Then click [Device Manager].
(5)
Right click on [KEW POWER QUALITY ANALYZER 6310” in the “Universal Serial Bus controllers”
(6)
Click [Uninstall] and uninstall the USB driver.
(7)
Remove the USB cord connecting your PC and the instrument once, and connect them again.
(8)
When “Found New Hardware Wizard” window appears, follow the procedure described at
“13-2 USB driver installation” and install the driver.