KYORITSU 6310 Instruction Manual - Manual (Page 147)

KEW6310 6.1.2 Instantaneous value measurement -Switching displays
KEW6310
6.8
6.1.2 Switching displays
Switching systems
Press the Cursor Keys and view displays for each system.
Switching items
Press the Cursor Keys and view the instantaneous, average values etc.
* Displayed contents are depending on the selected wiring configurations.
* ∑ means the total of the values at each channel.
Viewing the present settings
Press the ENTER Key to check the present settings.
Press the ENTER Key again to return to the Display change screen.
Wiring
V Range
VT Ratio
Frequency
8125 Clamp Sensor
500A/OFF A Range / Filter
CT:1.00 CT Ratio
Ch No.
DC1:5.000V Analogue Input DC Range