KYORITSU 6310 Instruction Manual - Manual (Page 167)

KEW6310 7.3.1 Integration measurement – Saving procedure
KEW6310
7.6
3 Manually start saving data, or press the F4 Key. Stand-by screen (WAIT) appears if saving
start date and time has been specified.
4 Saving starts and the LED status indicator lights up.
No setting change can be made during data saving . Press the F4 Key to check the settings.
5 Press the F1 Key to stop measurement. (At measurements with Timer function activated, this
Key activates in the same way.)
6
Measurement will end and the LED status indicator goes off.
File name for saving data is displayed.
. Flashes.
Destination for saving data will be
highlighted and flashes in red.
File name for saving data is displayed.
Flashes. Flashes.