KYORITSU 6310 Instruction Manual - Manual (Page 242)

11.6.2 Power quality – Measuring procedure(Flicker) KEW6310
11.37
KEW6310
11.6.2 Measuring procedure
Steps for measurement
Ensuring your safety See “Safety Warnings”.
↓
Preparatin for measurement See “Section 3 Getting started”.
↓
Setting See “Section 4 Setting”.
↓
Wiring See “Section 5 Wiring Configuration”.
↓
Flicker See this section.
* Preliminary measurement (for 10 sec) will be done automatically prior to Flicker measurement.
Measurement Setting Save Setting
V Range Recording method
Filter Recording start
Output item Recording termination
Output Threshold Destination to save data
Destination to save screenshot