KYORITSU 6310 Instruction Manual - Manual (Page 81)

4.2.2 Measurement Setting (QUALITY-Swell, Dip, INT Measurement) KEW6310
KEW6310
4.40
Setting for swell
100 ~ 200% (can be set by 1%)
* Default value (or after system reset) : 110%
1 Press the Cursor Keys and select [Swell], and then press the ENTER Key.
2
Press the Cursor Keys and alter values, and then press the ENTER Key.
Box with ▲▼ mark appears
at the rightmost digit.
Selected swell is displayed.