KYORITSU 6310 Instruction Manual - Manual (Page 68)

4.2.2 Measurement setting (W/Wh/DEMAND) KEW6310
4.27
KEW6310
1 Press the Cursor Keys and select [Demand Inspection], and then press the ENTER Key.
2
Press the Cursor Keys and select a desirable cycle, and then press the ENTER Key.
Demand Inspection Cycle listed on the drop down list depends on the selected interval.
Change the interval setting first when a desirable cycle isn’t listed on the drop down list.
Drop down list appears.
Selected Demand Inspection Cycle is displayed.