KYORITSU 6310 Instruction Manual - Manual (Page 84)

KEW6310 4.2.2 Measurement Setting (QUALITY-Swell, Dip, INT Measurement)
4.43
KEW6310
Setting for hysteresis
1 ~ 10% (can be set by 1%)
* Default value (or after system reset) : 5%
1 Press the Cursor Keys and select [Hysteresis], and then press the ENTER Key.
2 Press the Cursor Keys and alter values, and then press the ENTER Key.
Box with ▲▼ mark appears
at the rightmost digit.
Selected hysteresis is
displayed.