Rockwell Automation 20-COMM-D DeviceNet Adapter Series B FRN 2.xxx - Manual (Page 45)

Configuring the I/O 4-3
20-COMM-D DeviceNet Adapter User Manual
Publication 20COMM-UM002G-EN-P
Adding the Scanner to the I/O Configuration
To establish communication between the controller and adapter over the
network, you must first add the ControlLogix controller and its scanner to
the I/O configuration. This procedure is similar for all RSLogix 5000
versions.
1. Start RSLogix 5000 software.
2. Select File > New to display the New Controller screen.
a. Choose the appropriate choices for the fields in the screen to match
your application.
b. Click OK.
The RSLogix 5000 window reappears with the treeview in the left
pane.
3. In the treeview, right-click the I/O Configuration folder and choose
New Module.
The Select Module screen appears.
4. Expand the Communications group to display all of the available
communication modules.