Rockwell Automation 20-COMM-D DeviceNet Adapter Series B FRN 2.xxx - Manual (Page 47)

Configuring the I/O 4-5
20-COMM-D DeviceNet Adapter User Manual
Publication 20COMM-UM002G-EN-P
10. Click OK.
The scanner is now configured for the DeviceNet network and added to
the RSLogix 5000 project. It appears in the I/O Configuration folder. In
our example, a 1756-DNB scanner appears under the I/O Configuration
folder with its assigned name.
For convenience, keep the project open. Later in this chapter the project
will need to be downloaded to the controller.
Use RSNetWorx for DeviceNet Software to Configure and Save the I/O
to the Scanner
After adding the scanner to the I/O configuration, you now must configure
and save the I/O to the scanner.
1. Start RSNetWorx for DeviceNet software.
2. In the RSNetWorx for DeviceNet window, select File > New to display
the New File screen.
3. Select ‘DeviceNet Configuration’ as the network configuration type.
4. Click OK.
5. Select Network > Online to display the Browse for Network screen.
6. Expand the communication path from your computer to the DeviceNet
scanner.