Rockwell Automation 20-COMM-D DeviceNet Adapter Series B FRN 2.xxx - Manual (Page 97)

Using the I/O 5-13
20-COMM-D DeviceNet Adapter User Manual
Publication 20COMM-UM002G-EN-P
Controller Tags
When you add the adapter and drive to the I/O configuration ( Chapter 4 ),
RSLogix 5000 software automatically creates generic (non-descriptive)
controller tags for them. In this example program, the following controller
tags are used.
Figure 5.1 ControlLogix Controller Non-descriptive Controller Tags for Example
Ladder Logic Program
You can expand the Input and Output tags to reveal the input and output
configuration. The Input tag for this example requires ten 16-bit words of
data (see
Figure 5.2 ). The Output tag for this example program requires ten
16-bit words of data (see Figure 5.3 ).
Figure 5.2 ControlLogix Input Image with Non-descriptive Controller Tags for
Example Ladder Logic Program
Figure 5.3 ControlLogix Output Image with Non-descriptive Controller Tags for
Example Ladder Logic Program
Program Tags
To use the non-descriptive Controller tags that are automatically created,
you need to create the following Program tags for this example program.