Rockwell Automation 20-COMM-D DeviceNet Adapter Series B FRN 2.xxx - Manual (Page 78)

4-36 Configuring the I/O
20-COMM-D DeviceNet Adapter User Manual
Publication 20COMM-UM002G-EN-P
j. Reboot the computer and repeat steps 1 through 7 at the beginning
of this subsection.
The Unrecognized Device icon in the RSNetWorx for DeviceNet
graph view window in step 7 should have been replaced by a drive
icon (for this example, the icon for a PowerFlex 70 EC drive).
8. In the graph view window, right-click the 1747-SDN icon and choose
Properties… to display its properties screen.
9. Click the Module tab to display the Scanner Configuration Applet
screen.
10. Click Upload to upload the 1747-SDN configuration to the RSNetWorx
for DeviceNet project.
The 1747-SDN Module Tab screen appears.