Rockwell Automation 1747-L5xx SLC 500 Modular Hardware Style User Manual - Manual (Page 133)

133 Publication 1747-UM011G-EN-P - June 2008
Chapter
9
Maintaining Your Control System
This chapter covers the following maintenance issues:
• Handling and storing battery, catalog number 1747-BA
• Installing and replacing the battery of the SLC 5/01 or SLC 5/02
processor
• Replacing your SLC 5/03, SLC 5/04, and SLC 5/05 battery
• Replacing retainer clips on an I/O module
• Replacing a fuse on the power supply
See page 72 for important information on testing the Master Control Relay
Circuit and Preventive Maintenance.
Handling and Storing
Battery, Catalog Number
1747-BA Follow the procedure below to ensure proper battery operation and
reduce personnel hazards.
Handling
• Use only for the intended operation.
• Do not ship or dispose of cells except according to
recommended procedures.
• Do not ship on passenger aircraft.
ATTENTION
Do not charge the batteries. An explosion could result or the
cells could overheat causing burns.
Do not open, puncture, crush, or otherwise mutilate the
batteries. A possibility of an explosion exists and/or toxic,
corrosive, and flammable liquids would be exposed.
Do not incinerate or expose the batteries to high temperatures.
Do not attempt to solder batteries. An explosion could result.
Do not short positive and negative terminals together.
Excessive heat can build up and cause severe burns.