Rockwell Automation 1747-L5xx SLC 500 Modular Hardware Style User Manual - Manual (Page 252)

Publication 1747-UM011G-EN-P - June 2008
252 Communicating with Devices on an Ethernet Network
Press Prev or Next to display the previous or next page of the data
table file, if any.
You can change the Data Table Address, Display format and Refresh
data every xx seconds fields by entering data in the text boxes and
clicking Change Parameters.
To change the refresh data function back to the default of 15 s, click
Default. To disable the refresh data function, click Disable.
Data Table Monitor
You may also go directly to the Data Table Monitor screen by
selecting it on the home page or by clicking on D/T Monitor on the
bottom row of the other pages. In this case, since a particular data file
has not been chosen, a default screen is displayed.
From here you may enter in the starting data table address to display.