Troubleshooting your input modules – Rockwell Automation 1747-L5xx SLC 500 Modular Hardware Style User Manual User Manual

Page 164

Advertising
background image

Publication 1747-UM011G-EN-P - June 2008

164

Troubleshooting

Troubleshooting Your Input Modules

If your input
circuit status
indicator is

And your input
device is

And

Probable Cause

Recommended Action

On

On/closed/activated

Your input device will not

turn off.

Device is shorted or

damaged.

Verify device operation. Replace

device.

Your program operates as

though it is off.

Input circuit is

damaged.

Verify proper wiring. Try other input

circuit. Replace module.

Input is forced off in

program.

Check the FORCED I/O or FORCE

status indicator on processor and

remove forces.

Off/open/deactivated Your program operates as

though it is on and/or the

input circuit will not turn off.

Input device Off-state

leakage current

exceeds input circuit

specification.

Check device and input circuit

specifications. Use load resistor to

bleed-off current.

Input device is shorted

or damaged.

Verify device operation. Replace

device.

Input circuit is

damaged.

Verify proper wiring. Try other input

circuit. Replace module.

Off

On/closed/activated

Your program operates as

though it is off and/or the

input circuit will not turn on.

Input circuit is

incompatible.

Check specification and sink/source

compatibility (if dc input).

Low voltage across the

input.

Check the voltage across input circuit

and check source voltage.

Incorrect wiring or an

open circuit.

Check wiring and COMmon

connections.

Input signal turn-on

time too fast for input

circuit.

Check timing specifications.

Input circuit is

damaged.

Verify proper wiring. Try other input

circuit. Replace module.

Off/open/deactivated Your input device will not

turn on.

Input device is shorted

or damaged.

Verify operation. Replace device.

Your program operates as

though it is on.

Input is forced on in

program.

Check processor FORCED I/O or

FORCE status indicator and remove

forces. Verify proper wiring. Try other

input circuit. Replace module.

Input circuit is

damaged.

Verify proper wiring. Try other input

circuit. Replace module.

Advertising