Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 119)

Publication 1760-UM003A-EN-P - September 2005
Pico GFX Control Commands 7-39
11 Text line 3, column 5 - 8 x
12 Text line 3, column 9 - 12 x
13 Text line 3, column 13 - 16 x
14 Text line 4, column 1 - 4 x
15 Text line 4, column 5 - 8 x
16 Text line 4, column 9 - 12 x
17 Text line 4, column 13 - 16 x
18 Variable 1 x
c
(1)
19 Variable 2 x
c
(1)
20 Variable 3 x
c (1)
21 Variable 4 x
c
(1)
22 Scaling minimum value 1 x
23 Scaling minimum value 2 x
24 Scaling minimum value 3 x
25 Scaling minimum value 4 x
26 Scaling maximum value 1 x
27 Scaling maximum value 2 x
28 Scaling maximum value 3 x
29 Scaling maximum value 4 x
30 Control information line 1 x
31 Control information line 2 x
32 Control information line 3 x
33 Control information line 4 x
1)
(1) The value can only be written if it is assigned to a constant in the program.
TIP
The variables 1 to 4 (index 18 to 21) are transferred
as a 32-bit value in Intel format (Data 1 – Low Byte
to Data 4 – High Byte).
Table 6.135 Operand overview
Index
(hex) Operand read write